江西某高层商住楼剪力墙结构人防工程施工方案.doc

施工组织设计（方案）报审表GDe单位(子单位)工程名称某某商住楼（11层）人防地下室致 某某工程建设监理有限公司 （项目监理机构）：我方已根据本公司有关规定完成了 商住楼（11层）人防地下室施工组织设计（方案）的编制，并经我公司技术负责人审查批准，请予以审查。附件：（施工组织设计/施工方案） 1 份项目经理部（项目章） 项目负责人： 日 期： 年 月 日 专业监理工程师/总监代表审查意见：专业监理工程师/总监代表： 日 期： 年 月 日 总监理工程师审核意见：项目监理机构（项目章）总监理工程师： 日 期： 年 月 日 人防工程施工方案工程名称： 某某商住楼建设单位： 某某设计单位： 某某市第二建筑设计院有限公司监理单位： 某某工程建设监理有限公司工程地点： 某某市大涌镇德政路分包单位：某某省天科人防防护设备工程有限公司 总包单位：某某省华建建设股份有限公司某某省华建建设股份有限公司会 签 页工程名称某某商住楼方案名称人防工程施工方案分包单位会签（章）编制单位年 月 日编 制年 月 日编制人技术职称审 核年 月 日审核人技术职称总包单位项目部会签（章）项目技术负责人审核年 月 日审核人技术职称总包单位会签（章）技术处审核年 月 日审核人技术职称安全处审核年 月 日审核人技术职称总工室审批年 月 日审批人技术职称企业技术负责人年 月 日企业技术负责人职称施工设计方案目录第一章编制说明············································11.1编制内容及范围······················································11.2本设计有关标准、规程规则············································1第二章 工程概况············································12.1人防建筑专业························································12.2人防结构专业························································12.3战时给排水专业······················································12.4暖通专业····························································12.5电气专业····························································1第三章 总体施工部署········································23.1工程施工部署························································23.2施工程序及配合要求··················································23.3工期控制····························································33.4施工调度····························································3第四章施工准备计划········································44.1技术准备····························································44.2现场准备····························································44.2.1材料准备··························································44.2.2劳动力准备·························································44.3现场施工组织机构及职能··············································44.4资源需要量计划······················································54.4.1材料需要量计划····················································54.4.2劳动力需要量计划··················································64.4.3施工机具需要量计划················································6第五章 主要施工方法·········································65.1孔口防护设施制作与安装工程概况······································65.2人防门门框墙制作····················································65.3防护密闭门框安装····················································95.4门式防爆波活门安装··················································95.5质量标准····························································105.6穿墙管线密闭安装···················································105.6.1密闭穿墙短管的制作与安装·········································105.6.2 通风管道与附件的制作与安装········································115.6.3给水排水管道与附件的安装···········································115.6.4电缆、电线穿管的安装···············································125.6.5竣工验收·························································12第六章 安全管理措施目标·····································136.1项目管理目标·······················································136.2质量保证···························································136.3质量的技术措施·····················································136.4安全组织措施·······················································146.5安全管理制度·······················································156.6安全技术措施·······················································161、红字为修改过的或需要修改的提示，蓝字是要进行修改2、在部分文字措辞方面也要修改一下：如“本厂”，后面又是“公司”等第一章 编制说明1.1 编制依据本施工组织设计是依据国家现行规范、标准及我单位质量体系标准要求以及历年来我公司总结形成的同类工程施工的经验、工法以及现有的施工资源、装备能力和管理水平编制的。1.2本设计有关标准、规范规程1.人民防空工程施工及验收规范 GB5013420042.人民防空工程质量检验评定标准 RFJ01-20023.防空地下室建筑设计 FJ01-044.人民防空地下室设计规范 GB50038-2005第二章 工 程 概 况2.1人防建筑专业某某商住楼（11层）人防地下室，工程质量要求高、技术含量高，施工中必须进行科学的组织，严格的管理，周密的安排，协调好各方关系，以实现既定的总体目标。2.2人防结构专业本工程为剪力墙结构，防火等级为一级，结构安全等级为二级，地基基础设计等级为二级，地下室砼抗渗等级为S8.人防底板400厚，人防外剪力墙300厚，临空墙300厚，内隔墙250厚。砼强度等级详见各层平面图。2.3战时给排水专业人防给排水系统单独设置给水进水管，在战时水源处、洗消间处、口部处预留给水接口。与人防工程无关的管道不得穿越人防围护结构。穿过人防围护结构的所有管道（包括平时给排水管道），都应预埋防护密闭套管，套管要采用镀锌钢管。2.4暖通专业本工程战时采用机械进排风系统，设有清洁式通风、滤毒式通风、隔绝式通风三种通风方式。并能相互转换。电站设独立的进排风系统，防化等级：丙级。2.5电气专业战时供电系统从平时低压配电室引一路低压电源分别做为战时常用电源，在各穿越人防防护分区剪力墙上都有预埋有战时电缆预埋管，并在战时主要出入口均设有人防防爆门铃。各人防战时电缆预埋管都有定位翼环，材料为镀锌钢管。各防护单元战时常用电源和战时备用电源在各防护单元内总配电箱采用自动切换，以保证战时供电可靠性。第三章 总体施工部署3.1工程施工部署整个工程从时间上考虑，工程施工分为三阶段划分和控制的重点如下：第一阶段：施工准备阶段。主要工作是做好交接，调集人、材、物等施工力量进场，进行施工平面布置、图纸会审、办理开工有关手续，开展技术、质量交底工作，目标是充分做好开工前的各项准备工作，争取按甲方要求时间开工。第二阶段：施工阶段。核定建筑门框放线，准备重点做好各专业预埋定位；严格测量以保证门框的垂直度。第三阶段：收尾阶段。做好调试、收尾、清场工作。3.2施工程序及需监理与总包施工单位配合